tX-USBhubIn
Operating Instructions
Rev1.1
Precaution
Please read this instruction carefully before use.
Do not attempt to disassemble or modify the product.
Keep the product away from the external shocks or vibrations.
Do not use the damaged or peeled cables.
Do not use the unit outdoors.
Product specifications and features are subject to change without notice.
Warranty Information
Free warranty service
In case of the defect is found caused by the design or the production flaw while using the device properly, a manufacturer is
responsible for the faulty product and the free warranty service for 1 year from the date of purchasing.
Even in the warranty service period, malfunction or damage of products caused by the inevitable incident such as a natural
disaster is not subject of the free warranty service.
Warranty service at a cost
The product that free warranty service period is expired.
Malfunction of the product caused by a user’s fault.
Malfunction of the product caused by incidents.
Malfunction of the product caused by a natural disaster such as earthquake, flood, lightning & etc.
In case of the warranty service at a cost, a customer should cover the transportation costs.
Samples of a user’s fault
In case of attempts to disassemble or modify the device.
In case of not following the instructions on this manual.
Please read this operating instructions & Q&A board on our website carefully before asking for the warranty service.
Supplied Components
tX-USBhubIn Unit with Slim size bracket
Standard size bracket
Internal USB cable to connect the computer main board
Gender changer to connect 2.54mm USB header
Gender changer to connect 2.0mm USB header
Operating Instruction
Specification
USB host interface
-
3 pins internal USB signal connector
-
Connecting to the computer main board USB
header by the internal USB cable
USB output Port
-
Type A USB 2.0 connector x 2
-
USB power on/off switch
USB interface chip set
-
USB 2.0 Compliant HUB controller
-
HS(480 Mbps), FS(12 Mbps), LS(1.5 Mbps) support
Internal power input
-
Input voltage : +12.0V(+0.5V, -0.5V)
-
Input current : 2A max
-
15pin SATA power connector
External power input
-
Automatic external power selection
-
Input voltage : +6.5V ~ +9Vdc
-
Input current : 2A max
-
5.5mm OD, 2.1mm ID adaptor jack
USB port output power
-
Output voltage : +5.0V(+0.5V, -0.25V)
-
Over current protection : 0.8A at 20°C
-
Recommend output current : 0.5A >
Operating environment
-
Operating temperature : +10 ~ +30℃
-
Storage temperature : 0 ~ +40℃
-
Operating & storage humidity : 10% ~ 90%
www.sotm-audio.com
Ultimate High Performance Audio
