sPS-1000 Operating Instructions
Rev 1.0
Features/Specification
User interface
DC output on/off switch
Operating indicator
AC power input on/off switch (Rear panel)
AC power input
Voltage : 220Vac / 110Vac
Frequency : 50Hz / 60Hz
Current : 2A / 4A
DC power output
OUTPUT 1 : High level output
Voltage : 18Vdc, 19Vdc, 20Vdc, 21Vdc selectable
Current : 4A max
OUTPUT 2 : Mid level output
Voltage : 9Vdc, 10Vdc, 11Vdc, 12Vdc selectable
Current : 2A max
OUTPUT 3 : Low level output
Voltage : 5Vdc, 5.5Vdc, 6Vdc, 7Vdc
Current : 1A max
Protection
Output short
Over current
Over temperature
Dimension
Width : 360 mm
Height : 68 mm
Depth : 245 mm
Weight
8Kg >
Precautions
Do not use the product in enclosed spaces.
When installing the unit, the front/rear plates and both side plates
should be more than 5cm away from the wall or other products.
Make sure the AC power switch should be off when changing the
output voltage.
Make sure the AC power switch should be off when connecting the
cable.
Please check once again whether the output voltage setting and the
cable connections are correct before you turn on the DC power
switch, otherwise they will damage the unit.
Do not attempt to disassemble or modify the product.
Keep the product away from the external shocks or vibrations.
Do not use the damaged or peeled cables.
Do not use the unit outdoors.
Product specifications and features are subject to change without notice.
Warranty Information
Free warranty service
In case of the defect is found caused by the design or the production flaw while
using the device properly, a manufacturer is responsible for the faulty product and
the free warranty service for 1 year from the date of purchasing.
Even in the warranty service period, malfunction or damage of products caused by
the inevitable incident such as a natural disaster is not subject of the free warranty
service.
Warranty service at a cost
The product that free warranty service period is expired..
Malfunction of the product caused by a user’s fault.
Malfunction of the product caused by incidents.
Malfunction of the product caused by a natural disaster such as earthquake, flood,
lightning & etc.
In case of the warranty service at a cost, a customer should cover the transportation
costs.
Sample of a user’s fault
In case of attempts to disassemble or modify the device
In case of not following the instructions on this manual.
Please read this instructions and Q&A board on our website
carefully before asking for the warranty service.
