Söring SONOCA 185, Инструкция по эксплуатации

Страница: 39 / 50

Preventive maintenance
DocNr.: 03-4655 R03.01 | 22.09.2015 | en-US | Ultrasonic Generator
39
Safety check
8.2 Safety check
A safety check of the ultrasonic generator must be performed once a year. The safety
check may only be performed by qualified personnel authorized by the manufacturer
using suitable measuring and testing devices. The type and scope of the safety check
are prescribed by the manufacturer. The process and results of this safety check must
be recorded in a report.
8.3 Repairs
If the ultrasonic generator is defective or a fault cannot be remedied, you can send
the ultrasonic generator in for repair.
Have the ultrasonic generator repaired only by the manufacturer or an authorized
distributor. Never attempt to repair the ultrasonic generator yourself.
Send only cleaned and disinfected ultrasonic generators in for repair. Additional costs
will otherwise be incurred.
An irreparable ultrasonic generator must be properly disposed of (see chapter 9 Dis-
posal on page 40).
8.4
out.fm Seite 39 Dienstag, 22. September 2015 3:24 15