12 of 32
Instructions of use Mio Carbon (Design 2018)
2019-08-16
(2)
After inserting, the locking ball
(A)
must protrude visibly. After each insertion, pull at
least 1x to test whether the quick release axle is engaged. The wheels should not be able to
pull out.
3.1 Handling rear wheels
(1)
(2)
(2)
(A)
1.
1.
(1)
(1)
By braking the wheels with the hand rims, friction heat occurs.
Hand rim covers can expand from heat and can come off the hand rims.
3.1.2 Tire pressure
The appropriate operating pressure can be
found on the tire casing -
usually 3-10 bar.
(1)
When you get a flat tire, please contact your
retailer.
3.1.3 Axle wheels
Remove:
Put on:
3.1.1 General Indications
