10 of 32
Instructions of use Mio Carbon (Design 2018)
2019-08-16
2 General Information
2.3.1 Transporting without use
Make the desired packing size and secure the wheelchair and all disassembled parts with ade-
quate load securing. Before transporting a wheelchair, find out about suitable load securing
measures.
Carrying points:
• seat tubes in a folded position
• front frame tubes le/ri
• back frame tubes le/ri
• however
not
on the detachable leg supports and/or foot plates.
> 42°C
°C
2.3.2 Other important indications
The Mio Carbon (Design 2018) is
not
zugelassen als Sitz für den Transport in Kraftfahr-
zeugen.
The standard-compliant resistance to inflammation of textile materials was tested and en
-
sured. Nevertheless there is a risk of ignition of the flammable textile components. Keep igniti
-
on sources away from the wheelchair.
The wheelchair must not be exposed to excessive moisture or contact with salt water.
Pelvic restraints (pelvice belts as positioning help) can be ordered as an option in the wheelchair
configuration via the SORG order forms or by ordering via spare parts catalogues. The assembly
is carried out by your retailer.
In some cases, the product may interact with electromagnetic fields (e.g., anit-theft device in
stores). There is no danger for the user and/or the companion.
Due to the wide range of settings, it is not possible to comply with all limit values for all possible
configurations under the EU Interoperability Technical Regulations with regard to the accessibili
-
ty of the Untion rail system for persons with disabilities and persons with reduced mobility.
In the case of incidents involving the wheelchair, please contact your specialized retailer or us
as manufacturer. Product recalls etc. are published on our website www.sorgrollstuhltechnik.de.
There you will also find the respective contact persons.
