Instructions for use Loop
SORG
9 of 44
2019-08-16
2 General information
-10 to + 41°C
30 - 70%
x
y
Do not use the footrest(s) for getting in
and out of
the seat shell-underframe, it may
tilt forward.
x >700 mm
y > x + 50 mm
!
2.3 General safety information
Before each use, check:
• the frame, back tubes, add-on parts and accessories for visible damage, bending, cracks
or missing or loose screws,
• the wheels and quick-release axles for tightness,
•
that the inflation pressure and tyre tread are sufficient,
• that the brakes are working properly,
• that the angle adjustment elements/ eccentric clamps are secure,
• that the seat plate/ back/ footrest are tightly locked,
• that the anti-tipper/seat and back belts are functioning correctly,
•
that all previously dismantled components have been reconnected and firmly locked.
There is a risk of injury (e.g. due to crushing) from all rotating, swivelling or foldable com-
ponents, even during adjustment and repair work and during transport.
Danger of tipping over and overturning
Occupants must only get in and out of the seat-shell underframe with the wheel lock and
anti-tipper engaged.
2.2.4 Contraindication
Active use is unsuitable for:
• users with skin that is not intact,
• serious tonus dysregulation.
We accept
no
liability for damage to persons or objects resulting from the circumstances
described above.
The risks listed as examples below may occur when dismantling the following parts/accessories:
• Footrest: legs jammed during transport
• Headrest: loss or missing during transport
• Arm rests: loss during transport
• Seat shell adapter: loss or no attachment of the seat shell during transport possible
• Seat shell back guide: loss or misalignment of the seat shell during transport possible
• Push bail: loss or missing pushing option during transport
