SORG Loop RS, Сервисная книжка

Страница: 38 / 40

38 of 40
Service Record Loop
SORG
RS
2019-07-16
5 Technical specifications
5.1 Data and measurements
Model: Loop
SORG
RS
German Aid Indix Nr.: 18.50.03.2001
Type: 803
All measurements ± 5%
Indication Measurements
Comment
seat width (SW) 20-mm-steps 300 to 480 mm +40 mm growable
seat depth (SD) 20-mm-steps 300 to 480 mm ± 20 mm (op 60 mm) growable
back height (BH) 50-mm-steps 300 to 600 mm +50 mm growable
back angle 80° to 120° in raster
lower leg length
150 - 550 mm
back angle with gas
pressure spring
90° to 117° infinitely variable
leg support
about 60 mm forward displaceable infinitely variable
tilting
from -3° to +34° infinitely variable
ETRTO wheel size
at 20“ Ø 451 mm 444 mm Commercially available pneumatic tires
in the sizes 1 "(25.4mm), 1 3/8" (35mm)
- sizes 355 mm (20 "), 451 mm (22"), 540
mm, (24 ") All puncture-proof tires in
the mentioned dimensions.
ETRTO wheel size at 22“ Ø 489 mm 481 mm
ETRTO wheel size
at 24“ Ø 540 mm 533 mm
handrim Ø 19 mm diameter pipe
camber
0° or 2° 4° limited
Seat height (SH)
with horizontal seat and
horizontal frame
rear wheel
20“/22“
caster 5“/5,5“
410 mm
500 mm
height adjustment
+20/+40 mm
A-Rad 20“/22“
Lenkrad 6“/7“
430 mm
530 mm
height adjustment
+20/+40 mm
A-Rad 24“
Lenkrad 5“/6“
460 mm
530 mm
height adjustment
+20/+40 mm
A-Rad 24“
Lenkrad 7“
505 mm
550 mm
height adjustment
+20/+40 mm
wide wheelchair
absolutely
min. 520 mm depending on camber and kind of wheel
max. 810 mm
Wheelchair length ab -
solut
min. 790 mm at 20“ , standard leg support
max. 1200 mm bei 24“ rear wheel, seat depth 480 mm, detachable leg support
Wheelchair height ab -
solut
min. 830 mm at BH 300 mm and
22“ rear wheel
max 1430 mm at BH 600 mm and 24“ rear wheel
Height wheelchair fol-
ded back
min. 550 mm
max. 620 mm
incline
12% = 7° at 0 ° tilt and 0 ° tilt of the back angle
descent
12% = 7°
stability 12% = 7°
turning circle ca. 1100 mm depending on the size of the wheelchair
load capacity (max.)/
weight testdummy
120 kg inkl. seat shell
tare roadworthy
at:
seat height
300 mm, rear
wheel 20“,
caster 5“ PU
19,5 kg frame, seat plate, trum brake, handrim,
caster, leg support, push handle, tilting
mechanism
heaviest weight rear wheel 1,2 - 2,2 kg depending on the design and size
leg support from 2 kg
wheels
commercial pneumatic tires, sizes 1 ", 1 3/8" or puncture-proof tires (same dimensions), tire
inflation pressure usually 3-10 bar
corrosion protection material Stainless steel, aluminum
coating Powder coating, galvanizing
length of use of the
wheelchair
3 years at not excessive demand
life cycle of the wheelchair
5 years
Normative requirements The wheelchair meets the requirements of ISO 7176-8 and the requirements against
ignition.