17
3. - Display mode
Menu “3. Display mode” is used to de
fi
ne the control-
ler’s display for normal operation. This display appears
whenever two minutes go by without any key being
pressed. The main menu appears again when a key
is pressed.
The menu is closed by pressing “esc” or selecting “Exit
display mode”.
3.1. - Schematic
In graphics mode, the selected hydraulic systems are depicted with the
measured temperatures and operating states of the connected consumers.
3.2. - Overview
In overview mode, the measured temperatures and operating states of the connected consum-
ers are depicted in text form.
3.3. - Alternating
In alternating mode the schematic mode and then the overview mode are
active for 5 seconds at a time.
Display Mode
Содержание FWC3
Страница 31: ...31 Notes...
