27
4-2-2. SY Board Section-1
Notes on Assembly
[ 11 ] screw
#290
(1.4 X 5.0) (Tapping)
(0.12 ± 0.01 N·m)
[ 9 ] screw
#209
(M1.4 X 3.5)
(0.12 ± 0.01 N·m)
[ 3 ] Cushion (64210) (GND)
[ 12 ] Jack holder (64210)
[ 13 ] SY heat sink block
[ 10 ] screw
#209
(M1.4 X 3.5)
(0.12 ± 0.01 N·m)
Refer to "Notes on Assembling
the Cushion (64210) (GND)".
[ 5 ] SY insulation sheet A (64500)
Adhesive
Refer to "Notes on Assembling
the SY Insulation Sheet (64500)(2)".
[ 4 ] Peel off the flexible board
Refer to "Notes on Assembling
the SY Insulation Sheet (64500)(1)".
[ 1 ] BT HNS guard (88300)
Refer to "Notes on Assembling
the BT HNS Guard (88300)".
Refer to "Notes on Assembling the
Sheets of the SY Heat Sink Block".
[ 2 ] RL-1066 flexible board
Refer to "Notes on Assembling the
RL-1066 Flexible Board".
[ 7 ] Interception sheet (64200)
Refer to "Notes on Assembling
the Interception sheet (64200)".
[ 8 ] IMG radiation sheet (64500)
Refer to "Notes on Assembling the
IMG Radiation Sheet (64500)".
[ 6 ] Lens cushion (under) (64500)
Refer to "Notes on Assembling the
Lens Cusion (Under) (64500)".
Notes on Assembling the Sheets of the SY Heat Sink Block
Attach the SY heat transfer sheet (64500) and the SY shield sheet (64210) as shown in figure.
0 to 0.5 mm
0 to 1.0 mm
0 to 1.0 mm
0 to 0.5 mm
SY heat transfer
sheet (64500)
SY sheild sheet (64210)
SY heat sink (64500)
SY heat sink (64500)
Assembly order 1
Sony CONFIDENTIAL
For Authorized Servicer
SYS SET
2020/05/28 23:46:49 (GMT+09:00)
