background image

Warning

Do not disassemble or remodel the unit.

This can cause electric shock, personal injury or
fire. Do not connect any other system’s power
supply cord to this unit’s power supply cord
directly. If you are in any doubt about the safe
installation of this unit, please consult your
nearest Sony dealer.

Do not damage any pipes, tubes, fuel
tank or electric wiring system when
installing this unit.

This can cause fire. Before drilling any holes in
car panels for the installation of this unit, make
sure the installation will not damage any hidden
car parts.

Do not use any nuts or bolts connected
to the steering linkage, fuel supply or
braking systems.

This can cause fire or loss of control of the car.

Do not mount the monitor where it will
interfere with the airbag system.

This may cause the airbag to malfunction during
a crash causing injury to the passenger.

Mobile Color TV

Installation/Connections

安裝 線路之連接

Sony Corporation

 

2002

Printed in Japan

XTL-W70

Parts list

零件一覽表

2

3

5

6

4

9

0

qa

8

*I-3-233-038-21*

(1)

1

7

The numbers in the list are keyed to those in the instructions.

表內序號以說明書的序號為準。

×

 3

×

 5

×

 2

警告

請勿拆卸或改裝本機。

這會造成電擊,人身傷害或起火。請勿把其

他系統的電源線直接與本機的電源線接通。如果
對本機的安全安裝沒有把握,請就近向 Sony 經
銷商咨詢。

安裝本機時請勿損傷導管,軟管,油箱

或布線系統。

這會造成起火。在汽車儀表板上安裝本機而

需鑽孔前,應確保安裝作業不會損傷汽車的非明
露部件。

請勿借助與方向盤聯動機構,供油系統

或剎車系統相連的螺帽或螺栓。

這會造成汽車起火或失控。

勿將顯示器裝在有礙保險氣袋動作的地

方。

這會在發生車禍時使保險氣袋失靈,從而傷

害乘客。

Caution

• This unit is designed for negative earth 12 V

DC operation only.

• Do not get the wires under a screw, or caught

in moving parts (e.g. seat railing).

• Before making connections, turn the car

ignition off to avoid short circuits.

• Connect the 

red

 power input leads only after

all other leads have been connected.

• Be sure to connect the red power input lead to

the positive 12 V power terminal which is
energized when the ignition key is in the
accessory position.

• Be sure to fix the TV aerial with the double-

sided tape.

Run all earth wires to a common earth
point.

Fuse replacement

If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again after
replacement, there may be an internal
malfunction.

Warning

Use a fuse with the specified amperage rating.
Use of a higher amperage fuse may cause
serious damage to the unit.

Handling the connected
cords

After installing and connecting the unit, use the
supplied clamp to tie up the cords in a bundle so
it will not interfere with normal driving
operations.

It is very dangerous for the cords to become
tangled with the gearshift lever during
driving.

Use the supplied clamp 

0

 to secure up

the cords on the passenger seat side.

Notes

• Secure the connecting cords away from the seat

adjustment rails and the door frame.

• Make sure all other electric devices such as brake

lights and headlights are working properly after
installation is complete. Check also that indicators
turn on and the horn works properly.

注意

本機僅供負極接地 12 V 直流操作而設計。

不要使導線夾在螺栓下,或繞掛在移動部件上
(如:座椅扶手上)。

進行連接之前,請先關閉汽車的點火器,以避
免短路。

紅色

電源輸入引線只有其他全部引線均已連接

好後才能連接。

紅色電源輸入引線務必接至當點火鑰匙處於輔
助設備位置時通電的正 12 V 電源端子上。

務必用雙面膠帶固定電視天線。

全部接地線均引至一公共接地點。

更換保險絲

如果保險絲熔斷,則檢查電源接線並更換保

險絲。如換後再次熔斷,那么可能存在內部故
障。

警告

要用指定額定電流強度的保險絲,而高電流

強度的保險絲則會嚴重損壞本機。

處理接好的導線

本機安裝、接線完畢,用所配備的線夾把導

線扎成一束,使其不致於干擾正常的駕駛操作。

車行駛時,導線與變速杆纏在一起是十分危

險的。

用本機配備的線夾 

0

 把導線安全可靠

地固定在乘客座位旁。

固定連接導線使其遠離座位調節軌和車門框。

要確保本機安裝完畢後,剎車燈、前燈等其他所有
電器都工作正常,並檢查指示燈的接通和喇叭工作
是否良好正常。

0

Содержание XTL-W70

Страница 1: ...r ignition off to avoid short circuits Connect the red power input leads only after all other leads have been connected Be sure to connect the red power input lead to the positive 12 V power terminal which is energized when the ignition key is in the accessory position Be sure to fix the TV aerial with the double sided tape Run all earth wires to a common earth point Fuse replacement If the fuse b...

Страница 2: ...witch cord depends on your car Refer to the system connection diagram below and consult your car dealer or your nearest Sony dealer for further details 連接停車導線 務必將停車導線 綠色 接至停車製動開關導線上 停車製動開關導線的 安裝位置視您的汽車而定 可參考下面的系統接線圖 並向您的汽車經銷 商或就近向 Sony 經銷商咨詢 Parking brake warning light 停車製動警告燈 TV tuner unit 電視調諧器裝置 Parking brake switch cord 停車製動開關導線 Parking cord Green 停車導線 綠色 Parking brake switch 停車製動開關 Body earth...

Страница 3: ...能黏貼牢 安裝前 請用吹風機等給安裝面加熱一 下 須預先仔細地考慮過安裝位置 一旦黏貼上了而又改 變安裝位置時 雙面黏膠帶的黏著性將會減低 要卸下監視器架時 請用吹風機加熱一下安裝面 然 後緩緩地剝開黏膠面把它卸下來 7 7 Adjust the angle Loosen the lever and adjust the angle After this adjustment tighten the lever to fix the angle 調整角度 旋松支杆並調整角度 調好後 旋緊支杆以固定角度 Clamp 儀表板 6 8 Adjust the height When the monitor is at the right height tighten the clamp To keep the monitor from rattling while driving make sur...

Страница 4: ...ase of low temperature in order to attach the bases firmly Do not apply force to the aerials or allow them to become wet within 24 hours after attaching the bases Decide the mounting location Consider carefully the mounting location Make sure there is a distance of more than 10 cm from the aerial wire for optimum tuning capability 決定安裝位置 必須仔細考慮安裝位置 為能獲得最佳調諧能力 一定請距離天線 10 cm 以上安裝 Stick the body of t...

Отзывы: