11
If FM stereo reception is poor
— Monaural Mode
During radio reception, press
(SENS)
repeatedly until “MONO-ON” appears.
The sound improves, but becomes monaural
(“ST” disappears).
To return to normal radio reception mode, press
(SENS)
(“MONO-OFF” appears).
Tip
If FM broadcasts are difficult to hear, set DSO to
“OFF” (page 17).
Storing only the desired
stations
You can manually preset the desired stations on
any chosen number button.
1
Press
(SOURCE)
repeatedly to select
the radio.
2
Press
(MODE)
repeatedly to select the
band.
3
Press
(SEEK)
(+) or
(SEEK)
(–) to tune
in the station that you want to store.
4
Press the desired number button (
(1)
to
(6)
) for 2 seconds until “MEM”
appears.
The number button indication appears in the
display.
Note
If you try to store another station on the same number
button, the previously stored station will be erased.
Storing station names
— Station Memo
You can assign a name to each radio station and
store it in memory. The name of the station
currently tuned in appears in the display. You can
assign a name using up to 8 characters for a
station.
Storing the station names
1
Tune in a station whose name you
want to store.
2
Press
(LIST)
for 2 seconds.
3
Enter the characters.
1
Press the volume control dial to
select the desired character.
A
y
B
y
C
...
y
0
y
1
y
2
...
y
+
y
–
y
*
...
y
*
y
A
*
(blank space)
2
Press the select button after
locating the desired character.
The next character flashes.
3
Repeat steps
1
and
2
to enter the
entire name.
4
To return to normal radio reception
mode, press
(LIST)
for 2 seconds.
Tip
Simply overwrite or enter “
” to correct or erase a
character.
continue to next page
t
