5
1
2
Attaching the front panel
Place the hole
a
of the front panel onto the
spindle
b
on the unit as illustrated, then push
the left side in.
Notes
• Be sure not to attach the front panel upside
down.
•
Do not press the front panel too hard against the
unit when attaching it.
•
Do not press too hard or put excessive pressure
on the display window of the front panel.
•
Do not expose the front panel to direct sunlight
or heat sources such as hot air ducts, and do not
leave it in a humid place. Never leave it on the
dashboard of a car parked in direct sunlight
where there may be a considerable rise in
temperature.
Caution alarm
If you turn the ignition key switch to the OFF
position without removing the front panel, the
caution alarm will beep for a few seconds
(only when the POWER SELECT switch on the
bottom of the unit is set to the
A
position).
If you connect an optional power amplifier
and do not use the built-in amplifier, the beep
sound will be deactivated.
Getting Started
Resetting the unit
Before operating the unit for the first time or
after replacing the car battery, you must reset
the unit.
Remove the front panel and press the reset
button with a pointed object, such as a
ballpoint pen.
Note
Pressing the reset button will erase the clock
setting and some memorized functions.
Detaching the front panel
You can detach the front panel of this unit to
protect the unit from being stolen.
1
Press
(OFF)
.
2
Press
(OPEN)
, then slide the front panel
to the right side, and pull out from the
left side.
Notes
• Be sure not to drop the panel when detaching it
from the unit.
•
If you detach the panel while the unit is still
turned on, the power will turn off automatically
to prevent the speakers from being damaged.
•
When carrying the front panel with you, use the
supplied front panel case.
Reset button
b
a
µ
