13
Adjusting the sound
characteristics
You can adjust the bass, treble, balance, and
fader.
You can store the bass and treble levels
independently for each source.
1
Select the item you want to adjust by
pressing
(SOUND)
repeatedly.
VOL (volume)
n
BAS (bass)
n
TRE (treble)
n
BAL (left-right)
n
FAD (front-rear)
2
Adjust the selected item by rotating the
dial.
Adjust within three seconds after selecting
the item. (After three seconds, the dial
function reverts to volume control.)
Attenuating the sound
Press
(ATT)
on the rotary commander or
the optional wireless remote.
“ATT-ON” flashes momentarily.
To restore the previous volume level, press
(ATT)
again.
T i p
The unit decreases the volume automatically when
a telephone call comes in (Telephone ATT
function).
Changing the operative direction
The operative direction of controls is factory-
set as shown below.
If you need to mount the rotary commander on
the right hand side of the steering column, you
can reverse the operative direction.
Press
(SOUND)
for two seconds while
pushing the VOL control.
T i p
You can also change the operative direction of
these controls with the unit (page 14).
Press
(LIST)
to:
• Display the memorized names.
• Display the programme type.
Press
(SOUND)
to
adjust the volume
and sound menu.
To increase
To decrease
