Sony XR-C6120, Руководство по эксплуатации

Страница: 9 / 28

9
Playing a tape in various
modes
You can play the tape in various modes:
•REP (Repeat Play) repeats the current track.
•NR (Dolby NR) lets you select the Dolby
*
NR
B system.
•METAL (Metal) lets you play a metal or CrO
2
tape.
•BL SKP (Blank Skip) skips blanks longer than
eight seconds.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
*
Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. ”DOLBY“ and the double-D
symbol
a are trademarks of Dolby
Laboratories Licensing Corporation.
1
During playback, press (SHIFT) .
“SHIFT-ON” appears in the display.
2
Press (3) (PLAY MODE) repeatedly until
the desired play mode appears.
Each time you press (3) (PLAY MODE),
the item changes as follows:
REP n NR n METAL n BL SKP n ATA
3
Press
(4)
( n ) to select “ON.”
Play mode starts.
4
Press (SHIFT) .
To return to normal playback mode, select
“OFF” in step 3 above.
Note
If the “SFT” indication appears, press
(SHIFT) to
complete the mode setting.
Radio
Memorizing stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 6 stations
on each band (FM1, FM2, FM3, AM1, and
AM2).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE) , the source
changes as follows:
z TUNER z CD
*
TAPE
Z
MD
* Z
*
If the corresponding optional equipment is
not connected, this item will not appear.
2
Press (MODE) repeatedly to select the
band.
Each time you press
(MODE)
, the band
changes as follows:
z FM1 z FM2 z FM3
AM2 Z AM1 Z
3
Press
(SHIFT)
, then press
(3)
(PLAY
MODE) repeatedly until “B.T.M” appears.
4
Press (4) (
n
).
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds when the setting is stored.
5
Press (SHIFT) .
Notes
•
The unit does not store stations with weak
signals. If only a few stations can be received,
some number buttons will retain their former
setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.