11
EN
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons
and/or rotating controls.
By pressing buttons (the SOURCE
and the MODE buttons)
Every time you press
(SOURCE)
, the
source changes as follows:
TAPE
˜
TUNER
Pressing
(MODE)
changes the operation in the
following ways:
• the tape transport.
• the band, FM1
n
FM2
n
FM3
n
MW
n
LW.
Tip
You can turn on this unit by pressing
(SOURCE)
on the
rotary remote.
By rotating the control (the SEEK/
AMS control)
Rotate the control momentarily and
release it to:
• Locate the beginnings of the tracks on the
tape. Rotate and hold the control, and
release it to fast-wind the tape. To
playback, rotate and hold the control
again, and release it.
• Tune in the stations automatically.
Rotate and hold the control to tune in the
specific station.
OFF
Press
(OFF)
to turn
off the unit.
Rotate the VOL control
to adjust the volume.
Press
(SEL)
to adjust
and select.
To increase
To decrease
(SOURCE)
(MODE)
Press
(MUTE)
to
mute the sound.
Press
(DSPL)
to change the
displayed items.
By rotating the control while
pushing in (the PRESET control)
Push in and rotate the control to:
Receive the stations memorized on the
preset buttons.
Other operations
Changing the operative direction
The operative direction of controls is factory
preset as in the illustration below.
If you need to mount the rotary remote on the
right side of the steering column, you can
reverse the controls operative direction.
Press
(SEL)
for two seconds while
pushing in the VOL control.
RDS/Other Functions
