12
CD Player
CD/MD Unit (optional)
In addition to playing a CD with this unit, you
can also control external CD/MD units.
Playing a disc
(With this unit)
1
Press
(OPEN)
on the unit and insert
the disc (labelled side up).
2
Close the front panel.
Playback starts automatically.
If a disc is already inserted, press
(SOURCE)
repeatedly until “CD” appears to start playback.
*1
Pause is available only when playing back on this
unit (when playing back on the optional unit, pause
is not available). To cancel pause, press
(6)
(PAUSE) again.
*2
Available only when an MP3 file is played.
To skip tracks continuously, press
<
or
,
,
then press again within about 1 second and hold.
Notes
•
Before playing a track, this unit reads all track and
album information on the disc. Depending on the
track structure, it may take more than a minute
before playback begins. During this time, “Read” is
displayed. Play will automatically start when reading
is complete.
•
Depending on the condition of the disc, it may not
play back (page 7, 8).
•
While the first/last track on the disc is playing, if
<
or
,
is pressed, playback skips to the last/first
track of the disc.
•
When the last track on the disc is over, playback
restarts from the first track of the disc.
•
If you play a high-bit rate MP3 file such as 320 kbps,
sound may be intermittent.
To
Press
Pause*
1
(6)
(PAUSE)
Stop playback
(OFF)
Eject the disc
(OPEN)
then
Z
on the unit
Skip tracks
– Automatic
Music Sensor
(SEEK)
(
<
/
,
)
[once for each track]
Fast-forward/
reverse
– Manual Search
(SEEK)
(
<
/
,
)
[hold to desired point]
Skip albums*
2
– Album selection
(DISC)
(
M
/
m
)
[hold to desired point]
