To Add a Wi-Fi Sleep Policy
1
From the
Home screen
, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Tap , then tap
Settings
>
Keep Wi-Fi on during sleep
.
4
Select an option.
WPS
WPS (Wi-Fi Protected Setup™) is a wireless networking standard that helps you
establish secure wireless network connections. If you have little background knowledge
of wireless security, WPS makes it easy for you to set up Wi-Fi Protected Access®
(WPA) encryption to secure your network. You can also add new devices to an existing
network without entering long passwords.
Use one of these methods to enable WPS:
•
Push button method – simply push a button on a WPS-supported device, for example, a
router.
•
PIN method – your device creates a random PIN (Personal Identification Number), which
you enter on the WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS Button
1
From the
Home screen
, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi if it is not already on.
4
Tap , then tap
Settings
>
WPS Push Button
, then press the WPS button on the
WPS-supported device.
To Connect to a Wi-Fi Network Using a WPS PIN
1
From your
Home screen
, tap .
2
Find and tap
Settings
>
Wi-Fi
.
3
Turn on Wi-Fi if it is not already on.
4
Tap >
Settings
>
WPS PIN Entry
.
5
On the WPS-supported device, enter the PIN that appears on your device.
Sharing your mobile data connection
You can share your mobile data connection with other devices in several ways:
•
USB tethering
– share your mobile data connection with a single computer using a USB cable.
•
Bluetooth® tethering
– share your mobile data connection with up to five other devices via Bluetooth®.
•
Portable Wi-Fi hotspot
– share your mobile data connection simultaneously with up to 8 other devices, including
devices that support WPS technology.
To Share Your Data Connection Using a USB Cable
1
Deactivate all USB cable connections to your device.
2
Using the USB cable that came with your device, connect your device to a
computer.
3
From your
Home screen
, tap .
4
Find and tap
Settings
>
More
>
Tethering & portable hotspot
.
5
Drag the slider beside
USB tethering
to the right, and then tap
OK
if prompted.
is displayed in the status bar once you are connected.
6
To stop sharing your data connection, tap the
USB tethering
slider or disconnect
the USB cable.
You cannot share your device's data connection and SD card over a USB cable at the same
time.
49
This is an Internet version of this publication. © Print only for private use.