118
Setup Menu
Chapt
er
7
Men
u
s
a) Not displayed when the unit is in 23.98P mode.
b) When the optional XDBK-105 is installed and maintenance menu item M397 PORT CONFIGURATION is set to “VTR mode”.
c) When maintenance menu item M397 PORT CONFIGURATION is set to “VTR mode.”
Menu items in the 700s, relating to video control
Item number
Item name
Settings
703
BLANK LINE SELECT
a)
Switch blanking of the video output signal on or off for individual lines in
the vertical blanking interval.
Sub-item
The Y/C signal and odd/even fields are blanked simultaneously.
ALL LINE
- - -
: Specify the blanking for each line separately.
blank [blnk]
: Regardless of the setting of other sub-items, blank all lines
which can be specified in this menu item.
throu [thru]
: Regardless of the setting of other sub-items, switch off
blanking for all lines which can be specified in this menu item.
In 59.94i/59.94P/
29.97P mode
(UC)
LINE 12 ...
LINE 19
Specify blanking for lines 12 to 19.
blank [blnk]
: Carry out blanking.
throu [thru]
: Switch off blanking.
LINE 20
Specify blanking for line 20.
blank [blnk]
: Carry out blanking.
half
: Carry out half-blanking.
throu [thru]
: Switch off blanking.
In 59.94i/59.94P/
29.97P mode (J)
LINE 12 …
LINE 20
Specify blanking for lines 12 to 20.
blank [blnk]:
Carry out blanking.
throu [thru]:
Switch off blanking.
LINE 21
Specify blanking for line 21.
blank [blnk]:
Carry out blanking.
half:
Carry out half-blanking.
throu [thru]:
Switch off blanking.
In 50i/50P/25P
mode
LINE 9 ...
LINE 22
Specify blanking for lines 9 to 22.
blank [blnk]
: Carry out blanking.
throu [thru]
: Switch off blanking.
LINE 23
Specify blanking for line 23.
half
: Carry out half-blanking.
throu [thru]
: Switch off blanking.
705
EDGE SUBCARRIER REDUCER
MODE
a)
Select whether to enable the edge subcarrier reducer (ESR).
on:
Enable ESR.
off:
Do not enable ESR.
707
FORCED VERTICAL
INTERPOLATION OFF
The “Y-add” function is normally switched on automatically during jog or
variable-speed playback. This item selects whether to force the “Y-add”
function off.
auto
: Automatically switch the “Y-add” function on.
forced YADD off [off]
: Force the “Y-add” function off.
The “Y-add” function is a circuit operation to interpolate the video signal
vertically during jog or variable speed playback for the purpose of
reducing the vertical movement of the playback picture.
