23
Connections and Settings
Chapt
er
3
Pre
para
tio
ns
Connections and
Settings
Production of some of the peripherals and related devices
described in this chapter has been discontinued.
For advice about choosing devices, please contact your
Sony dealer or a Sony representative.
Connections for Content Browser
and non-Sony nonlinear editors
When using Content Browser, you can have a remote
access to this unit from a network connected computer.
You can also access to this unit from a nonlinear editor that
is not a Sony product via FTP/CIFS, and use this unit as a
material server.
For an overview and installation of Content Browser,
access the Sony website closest to your area.
Using the
(network) connector (FTP
connection)
The following shows an example of an FTP (File Transfer
Protocol) connection.
The PMW-1000 IP address and other network-related
settings are required for connection.
For details of the network-related settings, refer to the
Maintenance Manual.
Connecting this unit directly to a laptop computer
Connecting three PMW-1000 units to a laptop
computer via a LAN
When you connect the Network cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
Note
Note
Settings on this unit
Remote control switch: NET
Setup menu item 257 NETWORK ENABLE: net
PMW-1000 (this unit)
To
(network)
connector
Network cable (not supplied)
Laptop computer
CAUTION
Settings on all PMW-1000
Remote control switch: NET
Setup menu item 257 NETWORK ENABLE: net
Network cable
(not supplied)
To
(network)
connector
Laptop computer
PMW-1000