19
Rear Panel
Cha
p
te
r 2
Name
s
an
d F
unc
tions
of
P
a
rt
s
b
ANALOG AUDIO OUTPUT 1, 2 connectors (XLR
3-pin, male)
These output analog audio signals.
When the unit is shipped from the factory, the 1 connector
is set to audio channel 1, and the 2 connector is set to audio
channel 2. You can change these settings with setup menu
item 824 ANALOG LINE OUTPUT SELECT
You can set the output level with the maintenance menu.
(Factory default setting: +4dB)
Non-audio signals are muted.
For details, refer to the Maintenance Manual.
c
AUDIO MONITOR R, L connectors (XLR 3-pin,
male)
This outputs an audio signal for monitoring.
The monitored channel is selected with MONITR L and
MONITR R on the HOME page of the function menu.
See “Basic Operations of the Function Menu” (page 34)
for more information about the MONITR L and
MONITR R settings.
3
Timecode input/output section
a
TIME CODE IN connector (BNC type)
This inputs an SMPTE timecode generated by an external
device.
b
TIME CODE OUT connector (BNC type)
This outputs the following timecode, depending on the
operating state of this unit.
During playback:
Playback timecode
During recording:
The timecode from the internal
timecode generator or the timecode input to the TIME
CODE IN connector
IN
OUT
TIME CODE
1
TIME CODE IN connector
2
TIME CODE OUT
connector
