Sony XDCAM PDW-HR1, Руководство по эксплуатации, Страница: 152 / 214

152
Setup Menu
C
h
ap
te
r 8
M
enu
s
Menu items in the 500s, relating to disc protection (DISC PROTECTION)
Item number Item name Settings
501 STILL TIMER To protect the disc against shock and vibrations, and to lengthen the life
of the laser diodes, the unit automatically enters standby off mode
whenever a specified time elapses in a disc stop mode (stop mode or the
still picture mode of search mode). This allows you to set the time after
which the unit exits a disc stop mode and enters standby off mode.
0.5 s (0.5 sec) to 8 m (8 min) to 30 m (30 min): Can be set in the range
from 0.5 seconds to 30 minutes.
off: Do not put into standby off mode.
Menu items in the 600s, relating to the timecode, metadata, and UMID (TIME CODE GENERATOR/META DATA)
Item number Item name Settings
601 VITC POSITION
SEL-1 In 59.94i/59.94P/
29.97P mode Select the line into which to insert VITC signals (SD output)
12H (12 line) to 16H (16 line) to 20H (20 line): Any line from line 12
through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 20.
In 50i/50P/25P
mode Select the line into which to insert VITC signals (SD output)
9H (9 line) to 19H (19 line) to 22H (22 line): Any line from line 9 through
line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
602 VITC POSITION
SEL-2 In 59.94i/59.94P/
29.97P mode Select the line into which to insert VITC signals (SD output)
12H (12 line) to 18H (18 line) to 20H (20 line): Any line from line 12
through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i/59.94P/29.97P mode (J), output of wide picture information is
given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 16.
• In 59.94i/59.94P/29.97P mode (UC), output of wide picture information
is given priority if OUTPUT in setup menu item 731 is set to “auto” and
the VITC insertion line is set to line 20.
In 50i/50P/25P
mode Select the line into which to insert VITC signals (SD output)
9H to 21H to 22H: Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
605 TCG REGEN MODE Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB: Both the timecode and user bits are regenerated.
TC: Only the timecode is regenerated.
UB: Only the user bits are regenerated.