156
Specifications
App
end
ix
Error messages
Error codes appear in the time data display when an error
(usually a hardware problem) occurs. In addition, both
error messages and error codes appear in the monitor video
section and on the video monitor connected to the unit.
When an error message appears, follow the instructions in
the error message to resolve the problem.
To eject discs with the unit powered
off
As an emergency measure, disc cartridges can be removed
with the unit powered off. This operation should always be
done by a trained service technician.
Specifications
General
External dimensions (w/h/d, excluding projections)
210 × 132 × 396 mm (8
3
/
8
× 5
1
/
4
× 15
5
/
8
inches)
Mass
6.5 kg (14 lb. 5.3 oz.)
Power requirements
100 V to 240 V AC, 50/60 Hz
12 V DC
Power consumption
AC operation: 65 W
DC operation: 55 W
Inrush current
(1) Maximum possible inrush current at
initial switch-on (Voltage changes
caused by manual switching):
48 A peak, 4 A r.m.s. (240 V AC)
(2) Inrush current after a mains
interruption of five seconds (Voltage
changes caused at zero-crossing):
10 A peak, 2 A r.m.s. (240 V AC)
Operating temperature
5 ºC to 40 ºC (41 ºF to 104 ºF)
Storage temperature
–20 ºC to +60 ºC (–4 ºF to +140 ºF)
Operating relative humidity
25% to 90%
E r r o r 5 0 - 0 1 0
ERROR
AN ERROR HAS BEEN
DETECTED. INFORM SERVICE
OF FOLLOWING CODE:
50-010
PRESS EJECT KEY
TO EJECT DISC.
Error code
Error code in time data display area
Error code
Example error in video monitor screen
in mm (inches)
210 (8
3
/
8
)
132 (5
1
/
4
)
396 (15
5
/
8
)
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...