136
Maintenance Menu
Chapt
er
7
Men
us
Maintenance Menu
Items in the maintenance menu
The following tables show the items in the maintenance
menu.
• Item names are the names which appear on the video
monitor of this unit and an external monitor to which the
output of the COMPOSITE OUTPUT 2 (SUPER)
connector, SDSDI OUTPUT 2 (SUPER) connector,
HDSDI OUTPUT 2 (SUPER) connector, or HDMI OUT
connector is input.
• The values in the Settings columns are the values which
appear on the video monitor. Underlined values are the
factory defaults.
This manual does not explain the menu items in M0:
CHECK, M1: ADJUST, M2: SERVICE SUPPORT, and
M6: DRIVE. Refer to the Maintenance Manual for an
explanation of these items.
M3: OTHERS: Other setting items
Item
Setting
M30: SOFTWARE VERSION
Display of the software version of this unit
M31: SERIAL NUMBER
Display of the serial number of this unit
M33: FILE I/F
CONFIG
PROAV DISPLAY
Selects whether or not to display PROAV directory.
DISABLE:
Do not display PROAV directory.
ENABLE:
Display PROAV directory.
PC REMOTE
Disables or enables a FAM connection.
ENALBE:
Enable a FAM connection.
F-KEY SELECT:
Enable or disable a FAM connection using the function menu.
M36: HOURS METER RESET
Display and reset of the hours meter and the thread counter
M37: AUDIO
CONFIG
M370: HEAD ROOM
Select the audio reference level (headroom).
–20dB, –18dB, –16dB, –12dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i.
M371: DATA LEN
Select the audio channel configuration for IMX recording.
16bit × 8ch:
16-bit, 8-channel configuration
24bit × 4ch:
24-bit, 4-channel configuration
M372: NON-AUDIO
INPUT
Select whether to handle digital audio signals as non-audio signals during
recording.
audio:
Handle as linear PCM audio signals.
data:
Handle as non-audio signals.
Sub-Item
1
Tr1/Tr2
2 Tr3/Tr4
3
Tr5/Tr6
4 Tr7/Tr8
M373: INPUT LEVEL
Set the upper limit for the signal level input to audio channels 1/3 or 2/4.
+4dB, 0dB, –3dB, –6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i.
Sub-Item
1
CH1/CH3
2
CH2/CH4
M377: OUTPUT LEVEL
Set the reference level for audio output signals.
+4dB, 0dB, –3dB, –6dB, EBUL
Note
EBUL can be selected only when the system frequency is 50i.
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...