126
Setup Menu
Chapt
er
7
Men
us
602
VITC POSITION
SEL-2
In 59.94i mode
Select the line into which to insert VITC signals (SD output)
12H ... 18H ... 20H:
Any line from line 12 through line 20.
Notes
• You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
• In 59.94i mode, output of wide picture information is given priority if
OUTPUT in setup menu item 731 is set to “auto” and the VITC insertion
line is set to line 20.
In 50i mode
Select the line into which to insert VITC signals (SD output)
9H ... 21H ... 22H:
Any line from line 9 through line 22.
Note
You can insert VITC signals in two places. To insert in two places, set
both item 601 and item 602.
605
TCG REGEN MODE
Select the signal to be regenerated when the timecode generator is in the
regeneration mode.
TC&UB
: Both the timecode and user bits are regenerated.
TC
: Only the timecode is regenerated.
UB
: Only the user bits are regenerated.
607
U-BIT BINARY GROUP FLAG
Select the user bits to be used in the timecode generated by the
timecode generator.
000 (000:not specified)
: Character set not specified.
001 (001:iso character)
: 8-bit characters compliant with ISO 646 and
ISO 2022.
010 (010:unassigned-1)
: Undefined.
011 (011:unassigned-2)
: Undefined.
100 (100:unassigned-3)
: Undefined.
101 (101:page / line)
: SMPTE-262M page/line multiplex system.
110 (110:unassigned-4)
: Undefined.
111 (111:unassigned-5)
: Undefined.
611
TC OUTPUT PHASE IN EE MODE
Select the timecode output mode for output from the TIME CODE OUT
connector in E-E mode.
thru (through)
: Output the timecode input to the TIME CODE IN
connector as it is.
v-in (video input phase)
: Output the timecode with the same phase as
the input video signal phase.
v-out (video output phase)
: Output the timecode with the same phase
as the output video signal phase.
612
TC OUTPUT MUTING IN SEARCH
MODE
Select whether to suppress the output from the TIME CODE OUT
connector in jog/shuttle mode.
on
: Suppress.
off
: Do not suppress.
618
UPCONV EMBEDDED VITC
Select the source of the VITC embedded into output HDSDI when up
converting during playback of SD discs.
VITC:
Select the VITC of the SD disc.
LTC:
Select the LTC of the SD disc.
619
VITC
Select whether to record the VITC generated by the internal timecode
generator during IMX recording.
off:
Do not record the internally generated VITC.
on:
Record the internally generated VITC.
Note
Even if this item is set to “off”, VITC is recorded if the input video signal
contains VITC and the VITC line is set to “thru” in menu item 723.
651
UMID SDI OUTPUT
Select whether to output UMID in the VANC of the SDI output.
off
: Do not output.
on
: Output.
See “Using UMID Data” (page 160) for more information about UMID.
Menu items in the 600s, relating to the timecode, metadata, and UMID
Item number
Item name
Settings
Содержание XDCAM PDW-HD1200
Страница 1: ...PROFESSIONAL DISC RECORDER PDW HD1200 OPERATION MANUAL English 1st Edition Revised 1 ...
Страница 9: ...Table of Contents 9 Glossary 172 Index 174 ...
Страница 167: ...167 List of Supported USB Keyboards Appendix ...
Страница 178: ...Sony Corporation PDW HD1200 SYL 4 427 654 02 1 2012 ...