Sony XDCAM PDW-850, Руководство по эксплуатации

Страница: 210 / 280

Adjustments and Settings from Menus 210
Ch
apt
er 6 Men
u
Dis
p
la
ys
a
nd Det
a
iled
S
e
ttin
gs
a) Even when the MARKER item is set to OFF on
the MARKER page of the USER menu, the
ASSIGN 1/3/4 switches allow you to display or
not to display all markers.
b) This function cannot be assigned to the RET
button on the lens.
c) RETURN1 to 4 are displayed when an optional
CA-FB70/CA-TX70 Camera Adaptor is
connected.
d) Even if the RETURN VIDEO item is set to OFF
on the ASSIGNABLE SW page of the
OPERATION menu, you can use this switch to
display the image of the return video signal on
the viewfinder.
e) Only the Assign 3 SEL and Assign 4 SEL screens
appear.
f) Video momentarily becomes black and audio is
momentarily muted when the digital extender is
switched on and off.
g) This does not appear if nothing is assigned in the
Assign menu.
RETAKE
b) Assigns the function that
deletes the last recorded clip.
ATW Assigns the function that
turns auto tracing white
balance ON and OFF.
RETURN
VIDEO
HD-Y
c)
Assigns the function that
displays in the viewfinder
the HD-Y (1080i) signal
input to the GENLOCK IN
connector.
d)
RETURN
VIDEO
HDSDI
c)
Assigns the function that
displays the HDSDI signal
input on the SDI IN
connector in the
viewfinder
d)
LENS RET Assigns the functions
executed by the RET button
on the lens (recording review
and so on).
REC SWITCH Assigns the function that
starts and stops recording.
TURBO
SWITCH Assigns the turbo gain
function.
ZEBRA Assigns the zebra pattern
display function.
FREEZE MIX Assigns the function that
mixes a still picture
(monochrome) and camera
video (color) (effective for
framing shots).
CC 5600K Assigns the function that
applies an electrical 5600 K
filter.
ZOOM TELE/
WIDE
e)
For use with a lens that
supports serial
communications, assign the
ZOOM TELE setting to
ASSIGN 3, and the WIDE
setting to ASSIGN 4.
ZOOM WIDE/
TELE
e)
For use with a lens that
supports serial
communications, assign the
ZOOM WIDE setting to
ASSIGN 3, and the TELE
setting to ASSIGN 4.
SHOT MARK1 Assigns the function that
records a SHOT MARK 1
essence mark.
SHOT MARK2 Assigns the function that
records a SHOT MARK 2
essence mark.
Function Description
CLIP FLAG
OK Assign the functions that set
or clear OK, NG, and KEEP
flags during recording or
playback.
CLIP FLAG
NG
CLIP FLAG
KEEP
DIGITAL
EXTENDER
f)
Assigns the function that
electronically magnifies the
central part of the picture.
(All video output is
magnified, including
recorded video.)
x2, x3, x4, and x2x3x4 are
available for selection.
CLIP CONT
REC Assigns the function that
turns the Clip Continuous
Rec function on and off.
UA01 to
UA10
g)
Assigns the items assigned
in the ASSIGN SEL menu.
VF COLOR
DETAIL Assigns the VF color detail
function.
PLAY & SDI
REC S/S Assigns the REC trigger
signal output function,
during playback, to the
recorder connected to the
SDI OUT connector.
Function Description