Adjustments and Settings from Menus
209
Ch
apt
er 6 Men
u
Dis
p
la
ys
a
nd Det
a
iled
S
e
ttin
gs
3
Turn the MENU knob to change the
setting, and press the MENU knob.
4
Repeat steps 2 and 3 until you have set
all of the desired items.
Settings on decks in order to receive SDI ANC
(ancillary data) (PDW-HD1500)
To record camera metadata (including GPS data)
superimposed on the HD-SDI signal, together
with the audio/video signal, set the VANC RX
PARAMETER values in the Maintenance menu
to the following values.
Line:
11
DID:
0x43
SDID:
0x05
You can assign the desired function to any of the
ASSIGN switches.
(How to select an item in the menu screen: Turn
the MENU knob to move
b
to the desired item.)
1
Display the ASSIGNABLE SW page of
the OPERATION menu, and press the
MENU knob.
For details on menu operations, see “Basic
menu operations” (page 193).
You can assign functions by using the
following items.
2
Select the desired switch or button, and
press the MENU knob.
A selection screen for the selected switch or
button appears. You can use these screens to
assign one of the following functions.
Functions to be assigned to the ASSIGN 1/
3/4/5 (push-type) switch or RET button on
the lens
TEST OUT
SELECT
Selects the output signal from
the TEST OUT connector.
VBS:
Output composite video
signal. When you select
VBS, connect to the
VIDEO IN connector of
your monitor.
Y:
Output HD-Y signal.
R/G/B:
Output HD RGB
signal.
TEST OUT
SUPER
Selects whether to superimpose
(ON) or not superimpose (OFF)
text information on the signal
output from the TEST OUT
connector.
Assigning functions to ASSIGN
switches
Item
Setting
Item
Description
ASSIGN SW
<1>
Assigns the function to
ASSIGN 1 (push-type)
switch.
ASSIGN SW
<2>
Assigns the function to
ASSIGN 2 (slide-type)
switch.
ASSIGN SW
<3>
Assigns the function to
ASSIGN 3 (push-type)
switch.
ASSIGN SW
<4>
Assigns the function to
ASSIGN 4 (push-type)
switch.
ASSIGN SW
<5>
Assigns the function to
ASSIGN 5 (push-type)
switch.
ASSIGN SW
<RET>
Assigns the function to RET
button on the lens.
Function
Description
OFF
Assigns no function.
FRONT MIC
Assigns the function that
switches between stereo and
monaural when a stereo
microphone is connected.
PICTURE
CACHE
Assigns execution of
recording in picture cache
mode.
SUPER
(VFDISP&
MENU)
Assigns a mixing switch
function that selects mixing
or no mixing of
superimposed viewfinder
and menu text data into the
video signals output from the
SDI OUT 2 or TEST OUT
connector, when SDI OUT 2
SUPER or TEST OUT
SUPER on the OUTPUT 1
page of the OPERATION
menu are set to ON.
MARKER
Assigns the function that
displays or hides all
markers.
a)
