Setup Menu List
120
Me
n
u
C
o
nf
igur
at
io
n
a
nd Det
a
ile
d Set
tings
Shot
Transition
1)
Setting the
operating
conditions of Shot
Transition
Trans Time
2 to 15 sec (
4 sec
)
Set the time it takes to make a shot transition.
Trans Speed
1 to 10 (
5
)
Set the speed of the transition.
Time / Speed
Time /
Speed
Determine whether to specify the transition by time or speed.
Trans Curve
Linear / Soft Trans /
Soft Stop
Select the transition pattern.
Linear: To make the transition linearly
Soft Trans: To make the transition slowly at the beginning and
end, but linearly in between
Soft Stop: To make the transition slow down near the end
Start Timer
Off
/ 5 sec / 10 sec / 20 sec
Set the waiting time until the shot transition begins.
Rec Link
Off
/ Shot-A / Shot-B
Set the function to start a shot transition linked to recording
start.
Off: To start the transition using a button without linked to
recording start
Shot-A: To start a transition to Shot-A linked to recording
start
Shot-B: To start a transition to Shot-B linked to recording
start
MF Assist
1)
Turning the MF
Assist Function
on/off
On /
Off
Set to “On” to precisely adjust the focus automatically after
you roughly adjust it manually.
Color Bar Type
Selecting the types
of color bar
Multi
/ 75% / 100%
Select the type of color bars displayed when you press the
BARS/CAM button.
Multi: To output multiformat color bars
75%: To output 75% color bars
100%: To output 100% color bars
Flicker Reduce
Setting Flicker
Compensation
Mode
Auto / On /
Off
Set the operation of the Flicker-Reduction function.
On: To always activate it
Auto: To automatically activate it when flicker is detected.
Off: To not activate it
Frequency
50 Hz / 60 Hz
60 Hz
: UC model
50 Hz
: Other models
Set to the power supply frequency of the light source causing
flicker.
Zoom Speed
Setting the zoom
speed
Note
:
If you set a value between 0 and 7, zooming may not operate smoothly, depending on the
individual characteristics of the lens or operating environments.
High
0 to 99
(70)
Set the speed of zooming to be executed when you press the
on-handle ZOOM button with the zoom speed switch set to H.
Low
0 to 99
(30)
Set the speed of zooming to be executed when you press the
on-handle ZOOM button with the zoom speed switch set to L.
Remote
0 to 99
(50)
Set the speed of zooming to be executed when you press the
ZOOM button of the IR Remote Commander.
CAMERA SET
Menu items
Subitems and setting values
Contents
