Help Guide
http://helpguide.sony.net/tv/eusltn3/v1/en-003/print.html[7/5/2017 12:23:42 PM]
2
3
4
Turn the TV on, then hold the glasses within 50 cm (1.6 ft.) of the TV.
Press and hold the
(Power) button/indicator on the glasses for 2 seconds.
The Active 3D Glasses turn on and registration starts (the
(Power) button/indicator
blinks green and yellow). When registration is finished, a message appears in the TV
screen for 5 seconds, and the indicator lights up in green for 3 seconds.
If registration fails, the Active 3D Glasses will turn off automatically. In this case, repeat
the procedure above.
Put the Active 3D Glasses on.
From the next time, you can use the Active 3D Glasses by just turning them on. To turn them off, press
and hold the
(Power) button/indicator on the glasses for 2 seconds. To turn them on again, press
the
(Power) button/indicator.
Hint
To use the Active 3D Glasses with another TV, you need to register the glasses to that TV.
Perform the procedure above from Step 2.
Related topics
Understanding the basics of 3D TV (3D models only)
Watching TV in 3D (3D models only)
Remote control/accessories
[29] Watching TV | Watching in 3D (3D models only)
21
