20
F:\Data Disc\3216785411\321678541XAVW1EUR\01GB02CD-EUR.fm
masterpage:Left
XAV-W1
3-216-785-
41
(1)
Enjoying Surround Sound
Creating an ideal field for
multi-channel sound
A procedure example to create an ideal field for
multi-channel (5.1-channel) sound is introduced
in this section. Follow the page reference for
details.
1
Set the speaker configuration.
Set the connection status of the center speaker
and subwoofer.
t
By initial settings (page 14)
t
By setup (page 34)
2
Select your listening position.
To select from preset options
t
To calibrate precisely
t
3
Adjust the volume of each connected
speaker.
Adjust the volume from each speaker so that
their perceived level is equal from your
listening position.
t
4
Set the cut-off frequencies of the front/
rear speaker (HPF) and subwoofer
(LPF).
t
x
For VCD/CD/MP3/AUX playback or
radio reception
1
Activate Dolby Pro Logic II mode.
t
2
Activate CSO if a center speaker is not
connected.
t
x
For playback of DVD/CD in multi-
channel format (Dolby Digital, DTS,
etc.)
1
Activate CSO if a center speaker is not
connected.
t
x
For playback of the multi-channel area
of an Super Audio CD
1
Set “Super Audio CD Mode” to “High
Quality.”
t
Note
HPF/LPF (page 47) settings are deactivated when
set to “High Quality.”
Adjust the following items according to your
preference.
1
Set EQ7
*
.
*
Not available if CSO is activated.
t
2
Adjust the balance and fader of
speakers.
t
1
Preparation
2
Enjoying 2-channel sources in
multi-channel sound
3
Enjoying multi-channel sources
4
Sound characteristic adjustment
