7
GB
Sound select keys
Changes the sound.
(standby)
Turns the unit in standby mode (USB charging is
still available). To resume, press any buttons.
(monitor off)
Turns off the monitor. When the monitor is
turned off, touch any part of the display to turn it
back on.
(EXTRA BASS)
Changes the EXTRA BASS setting.
(EQ10/subwoofer)
Changes the EQ10/subwoofer setting.
Switching the FM/AM Tuning
Step
Set the FM/AM tuning step of your country.
1
Press HOME, touch [Settings]
[General]
[Tuning Steps], then set the FM/AM tuning
step.
2
To exit the setup menu, touch
(back)
three times.
Pairing with a BLUETOOTH Device
When connecting a BLUETOOTH device for the first
time, mutual registration (called “pairing”) is
required. Pairing enables this unit and other devices
to recognize each other.
1
Press HOME, then touch [Settings]
[Bluetooth]
[Bluetooth Connection]
[ON]
[Pairing].
flashes while the unit is in pairing standby
mode.
2
Perform pairing on the BLUETOOTH device
so it detects this unit.
3
Select your model name shown on the
display of the BLUETOOTH device*.
When pairing is made,
stays lit.
* If passkey input is required on the BLUETOOTH device,
input [0000].
Connecting Rear View Camera
By connecting the optional rear view camera to the
CAMERA IN terminal, you can display the picture
from the rear view camera. For details, see
“Connection/Installation” (page 12).
To display the picture from the rear view
camera
Press HOME, then touch [Rear Camera].
Basic Operations
