Sony WH-CH710N, Руководство пользователя

Страница: 70 / 111

Help Guide
Wireless Noise Canceling Stereo Headset
WH-CH710N
What is noise canceling?
The noise canceling circuit actually senses outside noise with built-in microphones and sends an equal-but-opposite
canceling signal to the headset.
Note
The effect of noise canceling may not be pronounced in a very quiet environment, or some noise may be heard.
When you are wearing the headset, depending on how you wear the headset, the effect of noise canceling may vary or a beeping
sound (feedback) may be heard. In this case, take off the headset and put it on again.
The noise canceling function works primarily on noise in the low frequency band such as vehicles and air conditioning. Although
noise is reduced, it is not completely canceled.
When you use the headset in a car or a bus, noise may occur depending on street conditions.
Mobile phones may cause interference and noise. Should this occur, move the headset further away from the mobile phone.
Do not cover the microphones on the left and right units of the headset with your hand, etc. The effect of noise canceling or the
Ambient Sound Mode may not work properly, or a beeping sound (feedback) may occur. In this case, remove your hand, etc.
from the left and right microphones.
A: Microphones (left, right)
Related Topic
Using the noise canceling function
5-013-896-11(1) Copyright 2020 Sony Corporation
70