Sony WH-CH700N, Руководство пользователя

Страница: 12 / 109

Help Guide
Wireless Noise Canceling Stereo Headset
WH-CH700N
Charging the headset
The headset contains a lithium ion rechargeable battery. Charge the headset using the supplied micro-USB cable.
Hint
Charging is also possible by connecting the supplied micro-USB cable to a booted computer.
You can use the headset by connecting the supplied headphone cable, even while charging the headset.
If charging starts while the headset is turned on, the headset will turn off automatically.
Note
Charging may not be successful depending on the USB AC adaptor.
If the rechargeable battery has not been used for a long time, its duration may shorten. However, the battery life will improve after
a few recharges.
If you store the headset for a long time, charge the battery to its full capacity once every 6 months to avoid over-discharge.
If the headset is not used for a long time, it may take longer to charge the battery.
If the computer enters into hibernation mode while connected to the headset, charging will not be completed properly. Check the
setting of the computer before charging. The indicator (red) will go off automatically if the computer enters into hibernation mode.
In this case, charge the headset again.
When you are connected the headset to the computer with a USB cable during charging or after charging finished, you cannot
turn on the headset or perform operations such as registering or connecting a Bluetooth device, music playback etc.
The noise canceling function cannot be used while charging or if kept connected to the computer after charging is complete.
If the headset detects a problem while charging due to following causes, the indicator (red) may turn off although charging is not
complete. In this case, charge again within the charging temperature range. If the problem persists, consult your nearest Sony
dealer.
Ambient temperature exceeds the charging temperature range of 5 °C – 35 °C (41 °F - 95 °F)
There is a problem with the battery.
Connect the headset and an AC outlet.
Use the supplied micro-USB cable and a USB AC adaptor to connect them.
The indicator (red) of the headset lights up.
Charging is completed in about 7 hours (*) and the indicator (red) goes off automatically.
After charging is complete, disconnect the micro-USB cable.
1
Time required for charging the empty battery to its full capacity. The time may be different depending on the conditions of use. *
12