Wireless Noise Canceling Stereo Headset
WF-1000XM3
Making a call
You can enjoy a hands-free call with a smartphone or mobile phone that supports the Bluetooth profile HFP (Hands-free
Profile) or HSP (Headset Profile), via a Bluetooth connection.
If your smartphone or mobile phone supports both HFP and HSP, set it to HFP.
The operation may vary depending on the smartphone or mobile phone. Refer to the operating instructions supplied
with the smartphone or mobile phone.
Only ordinary phone calls are supported. Applications for phone calls on smartphones or personal computers are not
supported.
Hint
Connect the headset to a smartphone or mobile phone beforehand.
1
Operate your smartphone or mobile phone to make a call.
When you make a call, the dial tone is heard from the headset.
If you make a call while you are listening to music, playback pauses.
If no dial tone is heard via the headset, switch the call device to the headset using your smartphone or mobile
phone or by holding your finger to the touch sensor on the left or right unit of the headset for about 2 seconds.
A:
Microphones
Used together with the noise canceling function microphones.
2
Operate the smartphone or mobile phone to adjust the volume.
3
When you finish talking, tap the touch sensor on the left or right unit of the headset twice (with an interval
of about 0.4 seconds) to end the call.
If you made a call during music playback, music playback resumes automatically after ending the call.
4
61
