38
Setup
Satellite Receiver
and VCR
To connect a satellite receiver and VCR
1
Connect the satellite antenna cable to the satellite receiver’s satellite
input jack.
2
Connect the CATV cable to the VCR’s VHF/UHF input jack.
3
Use the supplied antenna cable to connect the VCR’s VHF/UHF output
jack to the TV’s VHF/UHF jack.
4
Use an A/V cable to connect the satellite receiver’s A/V output jacks to
the VCR’s A/V input jacks.
5
Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s
A/V input jacks.
6
Run the Auto Setup program, as described in “Setting Up the Channel
List” on page 49.
Using S VIDEO jacks? See page 29.
AUDIO
OUT
SUBWOOFER
OUT
1
VIDEO IN
R–AUDIO–L
R–AUDIO–L
VIDEO
S VIDEO
3
VHF/UHF
AUX
TO
CONVERTER
(VAR/FIX)
(VAR)
6
DISPLAY SIGNAL OUT
DVI–HDTV IN
WHITE
DVI–HDTV
BLACK
R–AUDIO–L
A/V cable
Satellite receiver
Antenna
cable
(supplied)
Satellite antenna
cable
CATV cable
A/V cable
VCR
Rear of Media receiver unit
