Usi
ng t
he Menu
29
GB
AFT
Fine-tunes the selected programme number manually if you feel
that a slight tuning adjustment will improve the picture quality.
(Normally, fine tuning is performed automatically.)
1
After selecting “AFT”, press
,
.
2
Press
M
/
m
to adjust the fine tuning from –15 to +15,
then press OK twice.
Audio Filter
Improves the sound for individual channels in the case of distortion
in mono broadcasts. Sometimes a non-standard broadcast signal
can cause sound distortion or intermittent sound muting when
watching mono programmes.
1
After selecting “Audio Filter”, press
,
.
2
Press
M
/
m
to select “Low” or “High”, then press OK.
If you do not experience any sound distortion, we recommend
that you leave this option set to the factory setting “Off”.
Note
You cannot receive stereo or dual sound when “Low” or “High” is
selected.
Skip
Skips unused channels when you press PROG +/– to select
channels. (You can still select a skipped channel using the number
buttons.)
1
After selecting “Skip”, press
,
.
2
Press
M
/
m
to select “On”, then press OK.
To restore a skipped channel, select “Off” in step 2.
Decoder
Views and records the scrambled channel selected when using a
decoder connected to the Scart socket
1/
1 either directly
or via a VCR.
Note
Depending on the country/region selected for “Country” (page 26), this
option may not be available.
1
After selecting “Decoder”, press
,
.
2
Press
M
/
m
to select “On”, then press OK.
To cancel this function at a later time, select “Off” in step 2.
Option
Description
