Sony WEGA KDE-W50A11E, Руководство по эксплуатации

Страница: 25 / 194

25
GB
KDE-W50A11E
2-657-531- 11 (1)
Usi
ng t
he
M
enu
Sound Adjustment menu
1
Press OK to select “Effect”.
2
Press M / m to select one of the following sound effects, then press OK.
Off: Flat response.
Natural: Enhances clarity, detail, and sound presence by using “BBE High Definition
Sound System
*1
”.
Dynamic: Intensifies clarity and sound presence for better intelligibility and musical
realism by using the “BBE High Definition Sound System”.
Dolby Virtual
*2
: Uses the TV speakers to simulate the surround effect produced by a
multi channel system.
Tips
• You can also change sound effect by pressing
9
repeatedly.
• If you set “Auto Volume” to “On”, “Dolby Virtual” is automatically set to “Natural”.
*1
Manufactured under license from BBE Sound, Inc.
Licensed by BBE Sound, Inc. under USP4638258, 4482866. “BBE” and BBE symbol are
trademarks of BBE Sound, Inc.
*2
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Adjusts higher-pitched sounds (Treble), adjusts lower-pitched sounds (Bass), and
emphasizes left or right speaker balance (Balance).
1
Press OK to select the option.
2
Press < / , to set the level, then press OK.
Keeps a constant volume level even when volume level gaps occur (e.g., adverts tend to be
louder than programmes).
1
Press OK to select “Auto Volume”.
2
Press M / m to select “On”, then press OK.
Tip
If you set “Effect” to “Dolby Virtual”, “Auto Volume” will automatically be switched to “0ff”.
You can select the options listed below on the Sound
Adjustment menu. To select options, see “Navigating
through menus” (page 21).
Effect (sound effect)
Treble/Bass/Balance
Auto Volume
Continued
010COV.book Page 25 Tuesday, September 6, 2005 11:47 AM