Sony Wega KD-32DX51 AUS, Руководство по эксплуатации

Страница: 7 / 36

Getting Started
Getting Started
7
Rear of TV.
Supplied RF lead
Audio/Video lead
(Not supplied)
Rear of TV.
Supplied RF lead
Connecting a VCR
Connecting an aerial only
1.
Connect your aerial lead to the socket labelled
DIGITAL
on the rear of the TV.
2. Connect the supplied RF lead from the socket
labelled
on the rear of the TV to the socket
labelled IN* on your VCR.
3.
Connect an RF lead from the socket labelled OUT*
on your VCR to the socket labelled
ANALOGUE
on
the rear of the TV.
4. Connect an Audio/Video lead from the Video and
audio sockets on your VCR to one of the supplied
YUV Scart Adaptors. Connect the YUV Scart
Adaptor to the scart socket labelled
i 2/ r on the
rear of the TV.
5.
Insert a pre-recorded tape into the VCR and press
the ‘PLAY’ button. This enables the TV to locate
and store the video channel during the
‘Automatically tuning the TV’ procedure.
z
*Socket names may vary depending on make and model
of VCR. Refer to your VCR instruction manual for details.
1.
Connect your aerial lead to the socket labelled
DIGITAL
on the rear of the TV.
2. Connect the supplied RF lead from the sockets
labelled
and
ANALOGUE
on the rear of the TV.
Rear of VCR
Supplied
YUV
Scart Adaptor
Connecting an aerial and VCR
3