Sony Walkman NW-E10, Руководство по эксплуатации

Страница: 8 / 24

8
USB cradle
Display
Access lamp
Basic Operations
Transferring songs from the computer to
Network Walkman (Check-out)
1
Install the supplied OpenMG Jukebox software and import digital audio files to
OpenMG Jukebox.
For details, refer to the OpenMG Jukebox operating instructions.
Note
Before connecting the player to your computer for the first time, be sure to install "OpenMG Jukebox"
software and NW-E7/E10 driver from the supplied CD-ROM to your computer.
If you have already installed "OpenMG Jukebox" software, you also need to install NW-E7/E10 driver before
connecting the player to your computer.
2
Connect Network Walkman to your computer.
3
Connect Network Walkman to your
computer.
Connect the small connector of the supplied
USB cable into the USB jack on the USB
cradle, then the large connector to the USB
jack of your computer.
“PC” appears in the display, and the access
lamp flashes to confirm access to the
computer.
1
Attach your Network Walkman to the USB cradle.
2
Connect the AC power adaptor*.
Connect the supplied AC power adaptor to
an AC wall outlet first, then to the DC IN
jack on the USB cradle.
* You can use the player by only connecting the
dedicated USB cable, but the battery is not be
charged.
Note
Be sure to attach the player to the
arrow direction as illustrated below.
USB cable
(supplied)
to
to
USB cradle
AC power adaptor
(supplied)
to AC
wall outlet
to DC IN