Sony Walkman MZ-N910, Руководство по эксплуатации

Страница: 40 / 128

40
Labeling
You can label a track or disc while the
recorder is stopped, recording or playing.
Note that if you label a track while the
recorder is stopped, the track must be the
currently selected.
1
Press the jog dial.
2
Turn the jog dial until “EDIT”
appears in the display, and then press
the jog dial.
3
Turn the jog dial until “Name”
appears in the display, and then press
the jog dial.
4
Turn the jog dial until the following
item appears in the display, and then
press the jog dial.
The cursor flashes in the letter input
area and the track, group, or disc is
ready to be labeled.
5
Press VOL –.
The cursor shifts from the letter input
area to the character palette.
6
Select a letter using the control key
and press
N
to enter.
The selected letter appears in the
letter input area and the cursor moves
to the next input position.
The buttons used for character input
and their functions are listed below.
When labeling a
track “ : Name”
When labeling a
disc “ : Name”
5-way control key
(
.
,
>
,
N
,
VOL+, –)
X
Jog dial
END SEARCH
x
The cursor flashes.
Functions
1)
Operations
To move the cursor
in the character
palette. Control key
Turn the jog dial
(move the cursor
upward or
downward).
To select a
character in the
letter input area. Turn the jog dial.
To enter a letter. Press
N
Press the jog dial.
The cursor and character alternate.
The cursor flashes at the next
input position.
up
left
right
down