Sony Walkman MZ-N910, Руководство по эксплуатации

Страница: 27 / 128

27
7
Play the source you want to record.
The recorder starts recording
automatically when it receives the
playing sound.
To stop recording
Press
x
.
z
When there is no sound from the player for
about 3 seconds during synchro-recording, the
recorder goes into the standby mode
automatically. When the sound comes from the
player again, the recorder resumes synchro-
recording. If the recorder is kept in the standby
mode for 5 minutes or longer, the recorder stops
automatically.
Notes
•
The pause function cannot be turned on or off
manually during synchro-recording.
•
Do not switch the “SYNC REC” setting while
recording. Recording may not be done
properly.
• Even when there is no sound on the sound
source, there may be cases when recording
does not pause automatically during synchro-
recording due to the noise level emitted from
the sound source.
•
If a silent portion is encountered for
approximately 2 seconds during synchro-
recording from a sound source other than a
CD or an MD, a new track mark is
automatically added at the point where the
silent portion ends.
Long-time recording
(MDLP)
Select each recording mode according to
the recording time that you want.
Stereo recording is possible at 2 times
(LP2) or 4 times (LP4) the normal
(stereo) recording time. Monaural
recording at 2 times normal recording
time is also possible.
MDs recorded in MDLP mode can
be played back only on MD players
or recorders with MDLP playback
mode.
1
While the recorder is stopped, press
the jog dial.
2
Turn the dial until “REC SET”
appears in the display, and then press
the jog dial.
3
Turn the dial until “REC MODE”
appears in the display, and then press
the jog dial.
Jog dial
REC
continued