47
U
s
in
g t
he M
e
n
u
s
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Status
Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for the menus,
message when turning off the power, and warning messages.
Language
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai and Arabic.
Cooling Setting
Use this item when using the projector at high altitudes.
High:
Use this setting when using the projector at an altitude of
1,500 m or higher.
Standard:
Use this setting when using the projector at normal
altitudes.
When this item is set to “High”, the number of turns of the fan
increases, and the fan noise becomes slightly louder.
Standby Mode
Lowers the power consumption in standby mode.
When set to “Standard” the power consumption in standby mode
becomes normal.
When set to “Low”, the power consumption in standby mode is
lowered.
Power Saving
Sets the power saving mode.
When set to “On”, the projector goes into power saving mode if no
signal is input for 10 minutes. At that time, the ON/STANDBY
indicator lights in orange, then the screen becomes dark. In power
saving mode, the power saving mode is cancelled if a signal is input
or any button is pressed. If you do not want to set the projector to
power saving mode, select “Off”.
Note
