
14
Do not do any of the following while using
the unit.
Blocking the ventilation holes (intake
or exhaust)
For details on the location of the ventilation
holes (intake or exhaust), see “Location of
Controls” on page 8.
Tilting front/rear and left/right
Avoid using the unit tilted at an angle of
more than 15 degrees.
Do not install the unit anywhere other than
on a level surface or on the ceiling. Installing
the unit in such a location may result in
uneven color uniformity or reduce the
reliability of the effects of the lamp.
If the unit is tilted up or down, the image on
the screen may be trapezoidal.
Position the unit so that the lens is parallel to
the screen (
When installing the unit at high
altitudes
When using the unit at an altitude of
1,500 m or higher, set “Cooling Setting” on the
Setup
menu to “High” (
Failing to set this mode when using the unit at
high altitudes could have adverse effects, such
as reducing the reliability of certain
components.
Notes on Use
Ventilation holes
(intake)
Ventilation holes
(exhaust)
15° or more
15° or more
15° or more
15° or more
15° or more
Содержание VPL-VW1000ES
Страница 51: ...51 Using the Menus Lamp Setting When replacing the lamps set the desired lamp setting 1 page 75 ...
Страница 95: ......