Sony VPL-GTZ270 Скачать руководство пользователя страница 30

Страница: 30 / 54

Dynamic Range

Sets the video input level for HDMI 1 and HDMI 2 connectors.

Auto:

Sets the video input level automatically.

Limited:

The video input level is set for signals that are equivalent to 16-235.

Full:

The video input level is set for signals that are equivalent to 0-255.

If the video output setting of the connected HDMI device is not set correctly, light and dark parts of the
video may appear too light or too dark.

HDMI Signal Format

Switches the video signal formats for 4K.

Standard Format:

Displays a picture in the standard HDMI format. Normally use this setting.

Enhanced Format:

Displays a picture in a more detailed HDMI format. Use this setting only when the

corresponding devices are used.

Tips

• A picture or sound may not be output normally when “Enhanced Format” is selected. In this case, set

to “Standard Format.”

• Set “Enhanced Format” only when the corresponding devices are used.
• It may take time to display a picture after switching the video signal formats.

Stream Format

Selects the signal format for DisplayPort.

Single:

Select this format for the SST (Single Stream Transmission)-compatible signal of DisplayPort.

Dual:

Select this format for the MST (Multi Stream Transmission) -compatible signal.

Test Pattern

Displays a test pattern according to the setting.

On:

A test pattern appears on the screen to be used when adjusting the lens with “Lens Focus,” “Lens Zoom,”

and “Lens Shift.”

Off:

A test pattern does not appear.

Tip

While the test pattern is displayed, it is only displayed in green to allow you to adjust the focus easily.

Settings Lock

Locks menu item settings to prevent operational error (page 31).

Off:

Cancels the Settings Lock.

Level A:

Group 1 items (below) are not displayed on the menu, and are not available.

Level B:

Group 1 and Group 2 items (below) are not displayed on the menus, and are not available.

Setting items

Description

Note

Содержание VPL-GTZ270























































Результаты поиска

Содержание VPL-GTZ270

Отзывы:

Похожие инструкции для VPL-GTZ270

Бренды по названию

Популярные бренды

Sony VPL-GTZ270, Руководство по эксплуатации

Результаты поиска

Содержание VPL-GTZ270

Отзывы:

Похожие инструкции для VPL-GTZ270

Бренды по названию

Популярные бренды