Sony VPL-FHZ70 Скачать руководство пользователя

Страница: 34 / 70

The Connection/Power Menu

The Connection/Power menu is used for setting for the connections and power.

Setting items

Description

Network Setting

IPv4 Setting

IP Address Setup

Auto(DHCP):

The IP address is assigned automatically from the

DHCP server such as a router.

Manual:

To specify the IP Address manually.

IP Address/ Subnet
Mask/ Default
Gateway/Primary
DNS/Secondary
DNS

When “Manual” is selected for “IP Address Setup,” select the item
with the

key and input the value with

key. When all

items are entered, select “Apply” then press the ENTER key. The
entered settings will be registered.

IPv6 Information

Displays the IPv6 address information.
When setting the address of IPv6, set it from the browser (page 45).

HDBaseT Settings

LAN Setting

via HDBaseT/LAN Port:

You can select either via the LAN of the

HDBaseT equipment connected to the HDBaseT teminal or via the
network connection with the LAN terminal of the main unit.

RS-232C Setting

via HDBaseT:

You can connect this unit to the RS-232C terminal via

the HDBaseT transmitter. (Baud rate: 9,600 bps)

RS-232C:

Use when connecting to the RS-232C terminal of this unit

directly.

Extron XTP

On/Off:

Set to “On” when connecting the HDBaseT terminal of this

unit to XTP Systems

manufactured by Extron Electronics. Set to

“Off” when connecting to other equipment.

Dynamic Range

Sets the image input level of the INPUT B/C/D terminal.

Auto:

Distinguishes the image input level automatically.

Limited:

Set when the image input level is 16-235.

Full:

Set when the image input level is 0-255.

HDMI Cable

Long/Normal:

Select “Long” when the image is disturbed or not

projected.

Input-A Signal Sel.

Auto/Computer/Video GBR/Component:

When set to “Auto,”

selects the type of video signal input automatically when “Input-A” is
selected with the INPUT key.

Color System

Auto/NTSC

3.58

/PAL/SECAM/NTSC

4.43

/PAL-M/PAL-N:

When set

to “Auto,” selects the color system automatically when “Video” is
selected with the INPUT key.

ECO

Auto Power Saving

With No Input

Light Cutoff:

The light turns off automatically and power

consumption is reduced if no signal is input for about two minutes.
The light turns on again when a signal is input or any key is pressed. In
Light Cutoff, the ON/STANDBY indicator lights in orange. (page 49)

Standby

If no signal is input to the unit for about two minutes, the

power turns off automatically, and the unit enters standby mode.

Off:

The “With No Input” function is disabled.

Содержание VPL-FHZ70







































































Результаты поиска

Содержание VPL-FHZ70

Отзывы:

Похожие инструкции для VPL-FHZ70

Бренды по названию

Популярные бренды

Sony VPL-FHZ70, Руководство по эксплуатации

Результаты поиска

Содержание VPL-FHZ70

Отзывы:

Похожие инструкции для VPL-FHZ70

Бренды по названию

Популярные бренды