21
(GB)
Using the Menu
Adjustments and settings using the men
u
The projector is equipped with an on-screen menu for
making various adjustments and settings.
Unadjustable items are not displayed in the menu.
To change the language used in the menu, see page
26 (GB).
1
Press the MENU key.
The menu display appears.
The menu presently selected is highlighted in
yellow.
PICTURE CTRL
CONTRAST:
BRIGHT:
COLOR:
HUE:
SHARP:
D.PICTURE:
COLOR TEMP:
80
50
50
50
50
OFF
LOW
COLOR SYS:
AUTO
VIDEO
2
Use the
V
or
v
key to select a menu, then press the
b
or the ENTER key.
The setting items of the selected menu are
displayed.
SET SETTING
STATUS:
SPEAKER:
LANGUAGE:
INSTALLATION:
POWER SAVING:
SIRCS RECEIVER:
GROUP INDEX:
DEVICE INDEX:
0 1
0 1
ON
ON
ENGLISH
FLOOR-FRONT
OFF
FRONT&REAR
INPUT-A
3
Use the
V
or
v
key to select the item, then press the
b
or the ENTER key.
4
Adjust an item.
• When changing the adjustment level:
To increase the number, press the
V
or
b
key.
To decrease the number, press the
v
or
B
key.
Press the ENTER key to restore the original
screen.
• When changing the setting:
Press the
V
or
v
key to change the setting, then
press the
B
or the ENTER key.
The original screen is restored.
For details on setting individual items, see the relevant
menu pages.
Menus
Setting items
To erase the menu display
Press the MENU key. The menu display also
disappears automatically if no key is pressed for one
minute.
To reset settings that have been adjusted
Press the RESET key.
“Reset complete!” appears on the screen and the
settings appearing on the screen will be reset to their
factory preset values.
Items that can be reset are as follows:
CONTRAST, BRIGHT, COLOR, HUE, SHARP,
DOT PHASE, SIZE, SHIFT and BLANKING.
About the memory of the settings
The settings are automatically stored in the projector
memory.
Содержание VPL-FE100E
Страница 41: ...41 GB ...
Страница 81: ...41 FR ...