27
The INPUT SETTING Menu
A
d
ju
s
tm
e
nt
s an
d Set
tin
g
s
U
s
in
g a M
enu
Note that if the projector is used for profit or for public viewing, modifying the original picture by
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.
This projector has 40 types of preset data for
input signals (the preset memory). When a
preset signal is input, the projector
automatically detects the signal type and
recalls the data for the signal from the preset
memory to adjust it to an optimum picture.
The memory number and signal type of that
signal are displayed on the INFORMATION
menu (See page 32). You can also adjust the
preset data through the INPUT SETTING
menu.
See the chart on page 44 to find if the signal
is registered in the preset memory.
When the aspect ratio of input signal is other
than 4:3, a part of the screen is displayed in
black.
Shift
Adjusts the position of the picture. H adjusts the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
b
or the
B
key to adjust the horizontal position
and the
v
and
V
key for the vertical position.
Set according to
the input signal
Scan Converter
Converts the signal to display the picture according to
the screen size.
When set to “Off,” displays the picture while matching
one pixel of input picture element to that of the LCD.
The picture will be clear but the picture size will be
smaller.
On
Setting items
Functions
Initial setting
Note
About the Preset Memory No.
Note
