Sony VPL-CX85, Руководство по эксплуатации

Страница: 19 / 21

19
Troubleshooting
For Simple Mode
initialization, restart
Projector Station for Air
Shot as a user with
administrator privileges.
a
• The Simple Mode initial setting is not done (when
Windows XP/2000 is logged on without using the
administrator privileges).
c Log on using the administrator privileges and start
Projector Station for Air Shot. (The Simple Mode
initial setting is done.)
Unable to switch the
screen resolution.
a
• The resolution switching of the computer cannot be done
when the main window is started or ended.
c Set the [Option] and [Resolution Switching] settings to
[PC Setup] when this message appears every time.
Set the USB wireless
LAN module's IP address
to the automatic setting
(DHCP).
a
• The Windows network setting of the USB wireless LAN
module is not set to [DHCP] (when Windows 98SE/Me is
used).
c
Set the network setting of the USB wireless LAN
module to [Auto].
No response from
projector.
a
• During connection the projector, communication cannot
be done because the power of the projector is turned off,
etc.
c
Confirm the projector.
The projector is busy.
a
• The computer cannot communicate with the projector as
the other computer turns the projector on or off.
c
After a while, communicate again.
Cannot set the IP address.
a
• The IP address of the computer cannot be set.
c
After a while, start the main window again, disconnect
the USB wireless LAN module and connect it again,
and confirm the IP address setting of the computer
(when Simple Mode is set to [Off]).
Cannot set the Simple
Mode.
a
• Simple Mode cannot be set.
c
After a while, start the main window again and
disconnect the USB wireless LAN module and connect
it again.
The same IP address
already exists.
a a
• The set IP address is already in use.
c Input a new IP address.
Wireless LAN card not
inserted.
a
• The wireless LAN card is not inserted correctly into the
slot of the projector.
c
Check the card direction and insert until it stops.
Incompatible card
mounted.
a
• The supplied wireless LAN card is not used.
c
Use the supplied wireless LAN card.
The setting is invalid.
a
• The setting in the setting menu is not valid.
c
Check the displayed setting.
Cannot start the network.
a
• The network setting cannot be done.
c
Check the setting in the setting menu.
Message PC PJ Cause and Remedy