Sony VPL CX85 - XGA LCD Projector, Руководство по эксплуатации

Страница: 20 / 192

GB 20
Connecting the Projector
Connecting the
Projector
When you connect the projector,
make sure to:
• Turn off all equipment before making any
connections.
• Use the proper cables for each connection.
• Insert the cable plugs firmly; loose
connections may increase noise and
reduce performance of picture signals.
When pulling out a cable, be sure to pull it
out from the plug, not the cable itself
When connecting to a wireless LAN by using
the Air Shot, see “Operating Instructions for
Air Shot” contained in the CD-ROM.
To connect the projector, refer to
the illustrations on the next and the
following pages.
This section describes how to connect the
projector to a computer.
For more information, refer to the
computer’s instruction manual.
To connect a computer
1
Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
2
USB cable (supplied)
(Connect the USB cable to use a wireless
mouse.)
3
HD D-sub 15-pin cable (supplied)
• The projector accepts VGA, SVGA, XGA,
SXGA and SXGA+ signals. However, we
recommend that you set the output mode of
Connecting with a Computer
Notes
VIDEO S VIDEO AUDIO
AUDIO
AUDIO MONITOR
INPUT A
VIDEO IN
OUTPUT
INPUT B
REMOTE RS-232C
1 2 3
to USB connector
Right side
to monitor output
Computer
to audio output