26
Projecting a
Selected File
When the Power is
Turned on —
Startup
When the power is turned on, the
selected picture file is projected for about
30 seconds.
When you want to use the registered picture
file as the startup file, you must register a
picture file as the startup file in the index
screen (see page 22).
When a picture file whose resolution is larger
than XGA (1024
×
768) is registered, a startup
file may not be displayed correctly.
1
Select “Option” in Memory Stick
Home, then press the ENTER key.
2
Select “Setting”, then press the
,
or
ENTER key.
3
Select “Startup”, then press the
ENTER key.
Memory Stick Home
Select
Picture Viewer
Slide Show
Option
Select Folder
No.: 1/1234
Size: 1024x768
File: SPJP0001.JPG
Date: 2004.JUL.15 12:34PM
File
Setting
Memory Stick
Autorun
On
Startup
Original
Close
Original
Custom
Off
4
Select the item, then press the
ENTER key.
Original :
to select the original picture
memorized in the projector. The
original picture cannot be changed.
Custom :
to select the picture file
registered in the index screen which
is saved in
Memory Stick
Projecting a Selected File When the Power is Turned on — Startup
Off :
when you do not want to set the
startup
Notes
• When you want to use the registered
file with the custom setting, insert the
Memory Stick
where the registered
file is saved in the projector, then turn
on the power.
• You can register one startup file per
Memory Stick
.
Содержание VPL-CX75
Страница 2: ...2 ...
