24
The SET SETTING Menu
The SET SETTING Menu
The SET SETTING menu is used for setting various functions of the projector.
Items
Item descriptions
AUTO POWER
SAVING
You can make various power reduction settings.
With No Input
Lamp Cutoff:
The lamp turns off automatically and power
consumption is reduced if no signal is input for 10 minutes. The lamp
lights again when a signal is input or any key is pressed. In Lamp
Cutoff, the ON/STANDBY indicator lights in orange. (page 33)
Standby:
If no signal is input to the unit for more than 10 minutes, the
power turns off automatically, and the unit enters standby mode.
Off:
You can deactivate the With No Input.
With Static Signal
Lamp Dimming/Off:
If “Lamp Dimming” is selected, the lamp
slowly dims when the image has not changed for a period of time. You
can choose the period before the image darkens from “5,” “10,” “15,”
“20” minutes or “Demo..” If you select “Demo.,” the image will
darken about 30 seconds later.
Smart APA
On/Off:
When set to “On,” executes APA automatically when a signal
is input.
*1*2
Auto Input Search
On/Off:
When set to “On,” the projector detects input signals in the
following order: Input-A/Input-B/Input-C/Video/S Video. It indicates
the input channel when the power is turned on or the INPUT key is
pressed.
Input-A Signal Sel.
Auto/Computer/Component/Video GBR:
When set to “Auto,”
selects the type of video signal input automatically when “Input-A” is
selected with the INPUT key.
*3
Color System
Auto/NTSC
3.58
/PAL/PAL-60/SECAM/NTSC
4.43
/PAL-M/PAL-N:
When set to “Auto,” selects the color system automatically when “S
Video” or “Video” is selected with the INPUT key.
*3
IR Receiver
The front and rear remote control detectors of the projector.
Front & Rear:
The IR receivers on the front and rear of the unit are
available.
Front:
The IR receiver on the front is available.
Rear:
The IR receiver on the rear is available.
Panel Key Lock
On/Off:
When set to “On,” locks all the control panel keys of the
projector. However, you can operate the following when set to “On”:
• Press and hold the
?
/
1
key for approximately 10 seconds during
Standby mode.
c
The projector turns on.
• Press and hold the
?
/
1
key for approximately 10 seconds during
power on.
c
The projector goes to Standby mode.
• Press and hold the MENU key for approximately 10 seconds during
power on.
c
“Panel Key Lock” is set to “Off” and enables operation of all keys
on the projector.
Содержание VPL-CW255
Страница 54: ...Sony Corporation ...
